Monday to Thursday: 8.00AM to 5.45PM + overtime as required
We have an opening for a reliable and experienced Design Engineer. The successful applicants will be working on designing and engineering interior furniture for Rail, Airport, Commercial Office, and other specialised sectors.
About Us
Baker Bellfield is an industry leader in designing and manufacturing technical product solutions for Rail, Airport, Commercial Office, and other specialised sectors. We are continually integrating the core values of lean management into our business, by actively pursuing continuous improvement activities, targeting staff training, shopfloor efficiency & implementing 5S techniques.
- Permanent, full-time position
- 4 day working week is in operation (Monday to Thursday 6AM to 4.30PM).
- Starting rate of pay will be dependent on experience
- Company pension
Main Duties & Responsibilities
- Designing concept and production 3D‑CAD models of various products within the sector of Rail, Airport, Commercial Office and other specialised areas, using Solidworks.
- Generating detailed production and assembly drawings.
- Undertaking hand calculations to support initial design development stages.
- Providing necessary engineering support to production department and providing creative solution to the problems.
- Developing reports and documents for DFMEA, RAMS, LCC, O&M and Test Reports.
- Ensuring ECN and MRP systems are followed throughout the product development process.
- Specifying and maintaining welding, bonding, testing, documents for production and approvals.
- You will be responsible for the product development process and will be required to liaise with suppliers/customers throughout the project.
Necessary Requirements
- Applicants must have a Degree in Design or Engineering.
- Must have minimum of two‑year Solidworks work experience in designing complex assemblies and parts.
- Minimum of two‑year experience of producing technical drawings in a design job.
Advantageous Requirements
- Minimum of two‑year experience in generating welding documentations for applicable standards and mechanical testing procedures is important.
Monday to Thursday: 8.00PM to 6.30AM + overtime as required
Baker Bellfield is an established and globally respected name in the Rail, Airport and Commercial Interiors sector, and has specialised in designing, engineering and manufacturing interior components and systems for over 30 years. Investment in its people is a key policy of Baker Bellfield culture to ensure that we continue to meet the high standards expected by our customers.
Baker Bellfield are looking for experienced Metal Finisher (Days) to support and enhance our metalwork team.
Responsible For
Finishing of stainless steel / aluminium / mild steel parts
Main Duties & Responsibilities
- Work from engineering drawings, competently translating what is on paper into a high quality finished product that meets the exacting specifications.
- Fulfil work schedules established by the Production Manager and Department Supervisor in a timely manner.
- Maintain good, honest communication with the Production Manager, Supervisor and other team members to enable effective cooperation.
- Maintain the quality and standard of work expected from all employees
- Adhere to lean practice.
- Work effectively and efficiently in teams under the direction of the Team Leader or Department Manager
- Reduce scrap and rework.
- Adhere to Health & Safety requirements; PPE must be worn at all times.
- Operate the MRP system.
- Conduct scheduled checks on machinery and inform the Team Leader of equipment maintenance needed.
- Check all fabricated products dimensional and record information on approved documentation when required.
- Ensure that no cross contamination of ferrous and non‑ferrous materials occurs.
- Maintain good housekeeping to avoid cross contamination.
Necessary Requirements
- Minimum 5 years experience finishing of stainless steel/aluminium/mild steel parts
- Ability to read Technical DWGs
Advantageous Requirements
- Ability to operate data capture on MRP manufacturing system
Personal Attributes
- Good numerical skills
- Highly motivated, proactive, hands on approach and attitude
- Open and honest
- Responsive and flexible
- Ensure adherence to company codes of conduct, timekeeping and disciplines.
- Adhere to company QMS including documentation.
Responsibility for Quality
- Drive continuous improvements in all our business activities by adhering to lean practice
- Ensure all our products are machined in line with safety critical requirements
- Encourage excellence in everything we do
- Develop products through a design-led process to exceed our customers satisfaction, whilst reducing our environmental impact
- Encourage openness and collaboration in all aspects of our business
Monday to Thursday: 6.00AM to 4.30PM + overtime as required
Baker Bellfield is an established and globally respected name in the Rail, Airport and Commercial Interiors sector, and has specialised in designing, engineering and manufacturing interior components and systems for over 25 years. Investment in its people is a key policy of Baker Bellfield culture to ensure that we continue to meet the high standards expected by our customers.
Baker Bellfield are looking for experienced Welder/Fabricator to support and enhance our metalwork team.
Responsible For
Welding of stainless steel / aluminium / mild steel parts
Main Duties & Responsibilities
- Work from engineering drawings, competently translating what is on paper into a high quality finished product that meets the exacting specifications.
- Fulfil work schedules established by the Production Manager and Department Supervisor in a timely manner.
- Maintain good, honest communication with the Production Manager, Supervisor and other team members to enable effective cooperation.
- Maintain the quality and standard of work expected from all employees
- Adhere to lean practice.
- Work effectively and efficiently in teams under the direction of the Team Leader or Department Manager
- Reduce scrap and rework.
- Adhere to Health & Safety requirements; PPE must be worn at all times.
- Operate the MRP system.
- Conduct scheduled checks on machinery and inform the Team Leader of equipment maintenance needed.
- Check all fabricated products dimensional and record information on approved documentation when required.
- Ensure that no cross contamination of ferrous and non‑ferrous materials occurs.
- Maintain good housekeeping to avoid cross contamination.
Necessary Requirements
- Minimum 5 years experience MIG & TIG welding of stainless steel/aluminium/mild steel parts
- Ability to read Technical DWGs
Advantageous Requirements
- Ability to operate data capture on MRP manufacturing system
Personal Attributes
- Good numerical skills
- Highly motivated, proactive, hands on approach and attitude
- Open and honest
- Responsive and flexible
- Ensure adherence to company codes of conduct, timekeeping and disciplines.
- Adhere to company QMS including documentation.
Responsibility for Quality
- Drive continuous improvements in all our business activities by adhering to lean practice
- Ensure all our products are machined in line with safety critical requirements
- Encourage excellence in everything we do
- Develop products through a design‑led process to exceed our customers satisfaction, whilst reducing our environmental impact
- Encourage openness and collaboration in all aspects of our business
- Continually improve our business
Job Type: Full-time
Pay: From £14.00 per hour
Schedule:
- Days
- Monday to Thursday 6.00AM to 4.30PM
- 10 hour shift
Experience:
- Welding Fabricators: 5 years (preferred)
#J-18808-Ljbffr…